GPS Modules

  Home  >  Technical Support  >  FAQ

AGL 3080-Cannot log track file to the device
Post date :  2008/4/18
If your device is with v1.0 firmware, perform "Clear Disk" by pressing "Mark" and "Power" key simontaneously to clear disk.

If your device is with V2.0/2.1 firmware (all the devices with serial number of AS0803xxxxxxxx or after are with V2.0/2.1 firmware), press "Mark" and "Power" simontaneously for 5 seconds to enter "Setup Mode". At "SetUp mode", press "Mark" key for 5 seconds to perform "Clear Disk".

Your device should work fine again.

Copyright © AMOD Technology Co., Ltd. All rights reserved.     Our


is best viewed with Chrome, IE, Firefox.
Tel. +886-2-8751-6263 Add. 5F., No.250/252, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 11493, Taiwan (R.O.C.)
Fax +886-2-8751-6755 E-mail